Product Code:
SCI-EDU570001
Description:
Automatic Digital Compression Testing Machine
Specification:
The automatic range of 3000 kn capacity Automatic digital compression
testing machine has been designed to meet the need for reliable and
consistent testing of concrete samples.
All test machines feature the complete automatic test cycle with a
closed loop digital readout.
Once the specimen parameters have been introduced, it is sufficient to
press the start button to complete the test.
Automatic digital compression testing machine consist of their main
parts: frame, power pack and data acquisition & control system.
Each part has been designed to manufacture machines with a high degree
of mechanical stability and complies to EN 12390-4, BS 1881 and ASTM C39
(with suitable platen set)
Automatic test cycle with standard rapid approach
Graphical – LCD data acquisition and control system
Menu driven software for easy operation
Load vs time plot and instantaneous load rate displayed
Accurate load rate control within ±5 from 1 kN/sec to 20 kN /sec
Class 1 starting from % 10 of the full range
Ready stress calculation for the standards of EN 12390-3, EN 12390-5, EN
12390-6, En 1338, EN 1340, EN 196
SI, Metric, Imperial units
Data storage up to 256 tests
RS 232 output for printer or PC
Free of charge PC software for test control and advanced report printout
Automatic compression testing machine
Frame:
The Automatic digital compression testing machine load frame is a welded
steel fabrication carrying the ball-seated upper platen.
Positively located on the loading ram which is protected from debris by a
cover, the lower platen is marked for the centering of cube and
cylinder specimens.
The dimensions of the frame allow the testing of concrete cylinders up
to 320 mm long x 160 mm diameter; 100, 150 mm cubes.
All machines are supplied complete with 30 mm, 50mm and 90 mm distance
pieces.
To test samples shorter than 150 mm extra distance pieces should be
ordered.
All machines are supplied with flexi glass front and rear removable
safety doors.
All frames have a single acting upstroking ram with over travel
protection to stop the motor when the maximum platen travel be reached.
The Main Characteristics are:
High stability welded assembly
Distance pieces and safety door included
Ball seating assembly and frame tested for stability
50 mm piston stroke with safety limit switch
Platen hardness of min 55 HRC
Data Acquisition And Control System:
Lcd graphics data acquisition and controls system is designed to control
the Automatic digital compression testing machine and processing of
data from load cells or pressure transducers installed on the
compression machine frame.
Contained in light alloy housing and its design satisfies the ergonomic
requirements for various use.
The digital graphic display allows real time load vs time graph.
The easy to read lcd graphic display and touch-button data pad keys make
the unit quick and straight forward to operate.
All interactions with the measuring system are via the front control
panel by using simple menu-driven procedures.
At the end of the test cycle, the results can be stored in the large
memory or downloaded to a PC in software format.
Dedicated software package is available for further online data
processing, database management and certificate printing.
The Main Characteristics are:
High resolution 65.000 points
240 x 120 pixel blue-white graphic lcd display
Standalone full automatic testing capacity
CPU card by microprocessor 32 bit arm risk architecture
Can make manual tests if required
A sample type and dimensions can be entered respect to the standard
18 key touch membrane keyboard
Easy to operate with 6 main function keys
Large permanent memory up to 256 test results
Rs232c (optional ethernet) connection at 57600 band
One RS232 serial port for connecting either PC or printer for data
transmission
Two analogical channels, use for load cell or pressure transduce
Can control two frames (Compression & Flexural)
Power Pack:
Dual stage power pack which is controlled by is designed to supply
required oil to the frames.
Very silent Power pack can load a specimen between 1 kn/ sec to 20
kN/sec.
On the dual stage pump high delivery low pressure pump is used for rapid
approach and low delivery high pressure radial piston pump is used for
test execution.
On all power packs maximum pressure valve is used to avoid machine
overloading.
The Main Characteristics are:
Dual stage pump
750 W power
25 liter oil capacity
60-100 mm/min fast approach speed
Safety Features:
All Automatic digital compression testing machine are fitted with:
Max pressure valve to avoid machine overloading
Ram travel switch to prevent excessive piston travel
Front and rear gates with transparent durable flexiglass
Emergency stop button
Software controlled maximum load value
